Hitachi releases first Ultrastar 25nm SLC SSDs for storage arrays
Enterprise-class SSD drive family offers up to 400GB capacity and 536MB/sec throughput
By Lucas Mearian | Computerworld US | Published: 07:37, 10 February 2012
Hitachi Global Storage Technologies have unveiled the new Ultrastar SSD400S.B, which it describes as the first enterprise-class, single-level cell NAND flash solid-state drive (SSD) that uses 25nm technology.
The Ultrastar SSD400S.B is a 2.5-inch form factor SSD using a serial attached SCSI (SAS) 6Gbps interface. It comes in 100GB, 200GB and 400GB-capacity versions.
Other vendors have produced 25nm SSDs using multi-level cell (MLC) technology and serial ATA interfaces. SAS drives are more resilient because they are dual ported allowing for failover if one port goes bad.
Related Articles on Techworld
The new Ultrastar drives come with native encryption capability.
"Security is a growing concern among enterprise customers, especially those in financial services, e-commerce and online transaction processing," said Brendan Collins, vice president of product marketing for Hitachi GST. "Our solid state drives are designed to deliver the highest level of performance."
Hitachi is using SLC NAND from Intel. The SLC NAND flash, while more expensive, has vastly greater native performance and reliability compared with MLC drives, which require special software to increase their longevity and reliability.
A 400GB model of the Ultrastar SSD can endure up to 35 petabytes of random writes over the life of the drive, Hitachi GST said. That's the equivalent of writing 19.2TB/day for five years.
The Ultrastar SSD400S.B delivers up to 536MB/sec sequential read rates and 502MB/sec sequential write rates. It can deliver up to 57,500 sustained random read I/Os per second (IOPS) and 25,500 sustained random write IOPS.
